To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX SR308 and is the answer not in the manual?
General| Impedance | 6 Ω |
|---|---|
| Frequency range | 20 - 50000 Hz |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Radio Data System (RDS) | Yes |
| Product color | Black |
| Package depth | 537 mm |
| Package width | 416 mm |
| Package height | 268 mm |
| Dimensions (WxDxH) | 435 x 151 x 328 mm |
| Power requirements | AC 220-230 V, 50/60 Hz |
| Package weight | 10500 g |
| Power consumption (typical) | 310 W |
Weight and Dimensions| Weight | 8000 g |
|---|
Essential safety guidelines for using the AV receiver to prevent hazards.
Important precautions for operating the AV receiver, including care and warnings.
Lists the accessories included with the AV receiver for setup and use.
Explains how to install batteries and aim the remote control for operation.
Instructions on how to power the AV receiver on and off using the front panel or remote.
Details on operating the AV receiver, including display, volume, and source selection.
How to use the Music Optimizer function to enhance compressed music files.
Adjusts the brightness of the AV receiver's display for better visibility.
Identifies and explains the buttons and indicators on the AV receiver's front panel.
Explains the information displayed on the AV receiver's screen.
Identifies and describes the various input and output jacks on the rear panel.
How to use the remote controller to operate the AV receiver and its functions.
Instructions on using the remote controller to tune radio stations.
Explains how to connect and use two sets of speakers for different listening zones.
Guidance on speaker placement for optimal surround sound experience.
How to connect speakers, including configuration and cable labeling.
Important precautions to follow when connecting speakers to the AV receiver.
Illustrates how AV components connect for video and audio signals.
Details various audio and video cables, their jacks, and signal types.
How to connect external components using HDMI for audio and video.
Explains the ARC function for sending audio back from the TV to the receiver.
Guides on connecting various external devices via different input jacks.
How to use the AUX input jack on the front panel for audio connections.
How to connect Onkyo components using RI for system control and special functions.
Instructions for connecting FM and AM antennas for radio reception.
Guidance on choosing the best connection formats for AV equipment.
Explains different video connection formats like Composite, Component, and HDMI.
Details various audio connection formats: analog, optical, coaxial, and HDMI.
Step-by-step instructions for powering on the AV receiver.
Instructions on how to turn off the AV receiver and put it in standby mode.
How to select and play audio/video from connected components.
How to view current input source and signal format details.
Enhances sound quality for compressed music files.
Adjusts the brightness of the receiver's front panel display.
Temporarily mutes the audio output of the AV receiver.
Sets the AV receiver to turn off automatically after a specified time.
How to connect and use headphones with the AV receiver.
Configures input display names for RI-capable components.
How to select and use different speaker configurations (A, B, or A+B).
Instructions for tuning AM and FM radio stations.
Guides on auto and manual tuning methods for radio stations.
How to tune directly to a station by entering its frequency.
How to store and select favorite radio stations as presets.
Steps to remove stored radio presets.
Explains Radio Data System features like PS, RT, PTY, and TP.
How to view text information broadcast by RDS-enabled stations.
Search for radio stations based on program type (PTY).
Search for radio stations broadcasting traffic news (TP).
How to connect recording devices like VCRs or CD players.
How to record audio and video from different sources simultaneously.
Guides on recording audio and video sources to a connected recorder.
How to choose different sound modes like Movie, Music, or Game.
Explains how listening modes enhance the audio experience.
Illustrates speaker activation for different channel configurations.
Bypasses surround processing for pure stereo or mono sound.
Standard stereo sound output from front speakers.
For mono sources, sound from front speakers.
Settings for DTS audio formats like Neo:6 Cinema and Music.
Explains Onkyo's proprietary DSP sound modes for various scenarios.
How to access and navigate the AV receiver's setup menus on a TV.
General steps for using the setup menu with the remote controller.
Clarifies menu selections for Sp Config, HDMI Input, Component, and Digital Audio.
Assigns HDMI inputs to input selectors for video components.
Assigns component video inputs to input selectors.
Assigns digital audio inputs (optical/coaxial) to input selectors.
Specifies connected speakers and their sizes (Small/Large).
Sets crossover frequencies for speakers based on their size.
Boosts bass output by feeding bass sounds to the subwoofer.
Sets speaker distance for accurate sound arrival at the listener.
Adjusts speaker levels using test tones for balanced output.
Provides functions for adjusting sound and listening modes.
Selects audio channels for multiplex sources and sets mono playback.
Adjusts Dolby settings like Panorama, Dimension, and Center Width.
Settings for DTS audio formats like Neo:6 Cinema and Music.
Optimizes the Theater-Dimensional mode by specifying listening angles.
Allows custom naming of input selectors for easy identification.
Settings related to remote control ID and FM/AM frequency steps.
Configures HDMI settings like Audio TV OUT, Lip Sync, HDMI Control, and TV Control.
Enables audio return channel functionality for HDMI connections.
Links power functions of RIHHD-compatible components via HDMI.
Allows controlling the receiver from an RIHHD-compatible TV.
Adjusts individual speaker volume levels for listening.
Reduces dynamic range for late-night listening.
Enhances sound quality for compressed music files.
Softens overly bright movie soundtracks.
Sets priorities for audio output when digital and analog inputs are present.
Corrects audio/video sync issues by delaying audio.
Manually sets digital input signal formats (PCM or DTS).
Adjusts bass and treble tone controls for front speakers.
Guides on connecting various Onkyo docks for iPod control.
Details on using UP-A1 Dock, ND-S1, and RI Dock with iPods.
How the dock charges the iPod battery.
Explains status messages related to dock connection.
How to control iPod functions using the receiver's remote.
Steps for controlling iPod without RI connection.
Steps for controlling iPod with RI connection.
Table showing which remote buttons control iPod functions for different docks.
Lists components with preprogrammed remote control codes.
How to enter remote control codes for compatible components.
Specific remote codes for Onkyo components connected via RI.
Resets specific REMOTE MODE buttons to their default codes.
Resets the entire remote controller to its default settings.
How to control players/recorders supporting RIHD via HDMI.
Table detailing remote control button compatibility with various components.
Solutions for the AV receiver's standby indicator flashing red.
Troubleshooting steps for no or low audio output.
Troubleshooting for issues with turning the AV receiver on.
Diagnosing why front, center, surround, or subwoofer speakers are not producing sound.
Troubleshooting sound issues related to signal format, playback, and volume limits.
Solutions for no picture when using HDMI input.
Troubleshooting steps when on-screen menus are not displayed.
Troubleshooting for noisy reception or FM stereo issues.
Common problems and solutions related to the remote controller not working.
Troubleshooting iPod selection, recording, headphone, and multiplex language issues.
Troubleshooting RI connection and composite video input settings.
Technical details for the AV receiver's amplifier and general characteristics.
Specifications for HDMI, video inputs, and video outputs.
Specifications for audio inputs/outputs and tuner functions.
Specifications for speaker outputs, headphone jack, and other connections.
Explains HDMI interface, its capabilities, and compatibility.
Lists audio formats supported via HDMI.
Information on HDCP copy protection for digital video signals.
Lists components compatible with RIHD system control.
Details operations possible with RIHD-compatible TVs and players/recorders.
Step-by-step guide for connecting and setting up an HDMI-connected Blu-ray player.
How to operate components using the remote controller after setup.
