To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR304E and is the answer not in the manual?
General| Audio Channels | 5.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity and Impedance | 200 mV/47 kΩ |
| Component Video Inputs | 2 |
| Composite Video Inputs | 4 |
| Analog Audio Inputs | 5 |
| HDMI Outputs | 1 |
| Component Video Outputs | 1 |
| Composite Video Outputs | 1 |
| Analog Audio Outputs | 1 |
| Video Input Sensitivity and Impedance | 1 Vp-p/75 Ω |
| Video Frequency Response | 5 Hz - 100 MHz |
| Power Supply | AC 230 V, 50 Hz |
| Weight | 8.5 kg |
| Headphone Output | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Digital Audio Inputs | 2 (1 Coaxial, 1 Optical) |
| Speaker Terminals | Binding post |
| Power Output (RMS) | 75 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
| Signal-to-Noise Ratio | 100 dB |
Provides FCC compliance information for U.S. models.
Ensures compliance with Canadian standards for Canadian models.
Lists all accessories included with the AV receiver.
Explains how the AV receiver retains settings without a battery.
Details on amplifier power output, circuitry, and transformer.
Information on Dolby, DTS, and other audio processing features.
Lists available input/output types for video and audio.
Highlights other functionalities like adjustable crossover and iPod compatibility.
Identifies and explains the controls on the front panel of the receiver.
Explains the indicators and information shown on the front display.
Details all input and output jacks located on the rear of the receiver.
Step-by-step guide for inserting batteries into the remote controller.
Basic instructions for operating the AV receiver with the remote.
Explains how to select modes and use basic functions.
Details on controlling the AV receiver and other components.
Explains remote functions specific to DVD player operation.
Explains remote functions specific to CD player operation.
Explains remote functions for MD and CDR recorder operation.
Explains remote functions for HDD component operation.
Explains remote functions for cassette deck operation.
Guide to connecting speaker sets A and B and their optimal placement.
How to set up speaker channels, sizes, and number of speakers.
Important safety and connection guidelines for speaker wiring.
Instructions for attaching and using speaker cable labels.
Step-by-step guide for stripping and connecting speaker wires.
How to connect the AV receiver's subwoofer pre-out.
Instructions for assembling and connecting the AM loop antenna.
Instructions for connecting the supplied indoor FM antenna.
Guidelines for connecting external FM and AM antennas.
How to use a TV/FM antenna splitter for signal division.
Important notes before making any AV connections.
Description of AV cables and RCA color coding.
How to connect audio and video sources simultaneously.
Guide to selecting optimal video and audio connection formats.
Guide to connecting a DVD player's video and audio outputs.
Guide to connecting a VCR for playback and recording.
Instructions for connecting camcorders, game consoles, etc.
Guide to connecting satellite, cable, or set-top boxes.
Guide for connecting CD players and turntables (MM/MC).
Connecting HDD components and cassette/CDR/MD/DAT recorders.
Connecting Onkyo RI components and the power cord.
Steps to turn the AV receiver on and put it into Standby mode.
Recommended configuration steps for first-time use.
Configuring digital input sources for optimal audio performance.
Customizing input source names for easier identification.
Setting up speaker types (Small/Large) and subwoofer presence.
How to verify all speakers are connected and working correctly.
How to select input sources, speaker sets, and adjust volume.
Connecting and using 5.1 channel analog audio sources.
How to view current input source and signal format details.
Basic instructions for tuning into AM and FM radio stations.
Methods for auto and manual tuning of radio stations.
Configuring the AM tuning step for specific regions.
How to store and save favorite radio stations as presets.
How to remove saved radio presets.
How to view station name, frequency, and listening mode.
How to tune to previously saved radio stations.
Explains Radio Data System (RDS) functions like PS, RT, PTY.
How to view scrolling text information broadcast by RDS stations.
How to search for radio stations based on genre (PTY).
How to find and listen to traffic program broadcasts.
Connecting and using headphones for private listening.
How to modify the bass and treble tone controls.
Adjusting the brightness level of the front panel display.
Setting the AV receiver to automatically turn off after a period.
Temporarily silencing the audio output of the AV receiver.
Fine-tuning the volume level for each individual speaker.
Introduction to the various surround sound and DSP listening modes.
How to select listening modes directly from the AV receiver.
How to select listening modes using the remote controller.
Detailed descriptions of Direct, Stereo, Mono, Dolby, DTS, and DSP modes.
Guide to fine-tuning audio settings like Multiplex and Mono.
Adjusting how audio channels are processed for stereo sources.
Adjustments for Panorama, Dimension, and Center Width in PL II Music.
Adjustments for Center Image in DTS Neo:6 Music mode.
Reduces dynamic range for quiet listening of Dolby Digital material.
Softens bright movie soundtracks mixed for theaters.
How to record audio and video from a selected input source.
How to overdub audio from one source onto video from another.
Fine-tuning speaker parameters beyond basic configuration.
Setting the crossover frequency based on speaker size.
Option to boost bass by feeding front channel sound to the subwoofer.
Calibrating speaker distances for optimal surround sound timing.
Adjusting the volume level for each speaker for balanced output.
Manually setting digital input formats (PCM/DTS) if auto-detection fails.
Adjusting audio delay to correct sync issues with progressive video.
Solutions for the receiver not turning on or shutting off unexpectedly.
Troubleshooting steps for no sound or unbalanced audio output.
Solutions for specific speaker channels not producing sound.
Troubleshooting sound problems related to specific digital formats.
Solutions for issues like no picture or noisy radio reception.
Troubleshooting problems with the remote controller's functionality.
Solutions for issues encountered during recording operations.
Addresses issues with headphones, RI functions, and receiver lockups.
Details on output power, THD, frequency response, and impedance.
Details on video input sensitivity, output, and frequency response.
Details on FM and AM tuning frequency range and sensitivity.
Information on power supply, consumption, dimensions, and weight.
Comprehensive list of all audio, video, and digital input/output ports.
