Onkyo TX-8511

Basic operations
Stereo headphones with a standard binaural
(stereo) plug can be connected to the
PHONES jack.
When the headphone plug is inserted, the
speakers are not automatically muted but
can be controlled with the SPEAKERS A/
B buttons.
■ » < ■
MJOOWUTC
❖
Press the MUTING button on the remote
control.
This button temporarily switches oIT the
sound from the speakers or headphones.
The AUDIO MUTE indicator will Bash.
The muting function will be cancelled if
you:
• press the MUTING button again, or
• turn the power off then on.
suc^
nr f
j—»- 90 —*" 80 70
^ Cancel •-— 10 20
The sleep timer can power off the system
after a speciftcd time period.
To opemte this function, use the remote
control supplied with yourTX-851 1.
1. Start the source playing that you
would like to listen to (CD, Tape or
radio broadcast).
2. Set the amount of time after which
you want the system to turn off.
The sleep timer works for up to 90 minutes.
You can shorten the timer by 10 minute
increments by pressing the SLEEP button
until the desired time has been reached.
After the set time passes, the power will be
switched off automatically.
Cancelling the SLEEP setting
The timei. will be cancelled if you:
• presrthe SLEEP button until it changes
to the display of the source you are lis¬
tening to, or
• turn off the power while the timer is
operating.
14