Onkyo TX-NR3007 Quick Setup Guide

Name: Onkyo TX-NR3007
Brand: Onkyo
Rating: 5 (1 reviews)

2 pages

To Next Page

Surround

Left

Surround

Back

Left

Surround

Back

Right

Surround

Right

Listener

Sub

woofer

Front

Left

Surround

Left

Surround

Back

Left

Surround

Back

Right

Surround

Right

Listener

Front

Right

Center

Front

Wide Left

Front

Wide Right

Sub

woofer

Front

High

Left

Front

High

Right

Speaker Layout (Main Room)

1/2''-5/8''

(12-15mm)

Powered

subwoofer

Front

left

speaker

Front

wide left

speaker

Front

high left

speaker

Front

right

speaker

Front

wide right

speaker

Front

high right

speaker

Center

speaker

Surround back

right speaker

Surround

left speaker

Surround

right speaker

Surround back

left speaker

See the other side of this sheet for the AV component hookup.

Speaker Hookup

Thank you for purchasing this product.

This quick setup sheet shows the typical hookup method

for connecting speakers and AV components (DVD player,

TV, cable/satellite receiver).

For more detailed hookup information and operating

instructions, please see the Instruction Manual.

QUICK SETUP

Model : TX-NR3007/TX-NR5007

* 2 9 4 0 0 0 7 1 *

*1 Level and distance can be set individually

for each output. If you use one subwoofer,

connect it to PRE OUT: SW1.

Illustrations are

based on TX-NR5007.

Other manuals for Onkyo TX-NR3007

Service Manual281 pages

Firmware Update5 pages

Questions and Answers:

I
Ian LaneJul 26, 2025
What to do if my Onkyo TX-NR3007 has an internet connection error?
- C
  Clinton FloydJul 26, 2025
  If you're experiencing an internet connection error with your Onkyo Receiver, check the following: Ensure that the IP address, subnet mask, gateway address, and DNS server are configured correctly. Verify that your router is powered on and that the receiver and router are connected with an Ethernet cable. Also, confirm that the router's setup configuration is correct. If your network only allows one client and another device is connected, the receiver won't be able to access the network. If you're still having trouble, your DNS or proxy server may be temporarily down, or you may need a router if your modem doesn't function as one. Depending on your network, proxy server configuration may be needed. Contact your Internet Service Provider if problems persist.

Onkyo TX-NR3007 Specifications

General

Impedance	4 Ω
Frequency range	5 - 100000 Hz
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.05 %
HDMI	No
Package depth	591 mm
Package width	576 mm
Package height	337 mm
Dimensions (WxDxH)	435 x 198 x 463 mm
Power requirements	AC 220-240 V, 50/60 Hz
Output power description	200 W/Ch
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Radio Data System (RDS)	Yes
Headphone connectivity	2.5 mm
Product color	Silver
Package weight	Weight of the packaged product in gram.
Power consumption (typical)	1060 W