Onkyo TX-NR3010 - Page 16

Connections
En-16
■ Speakers A: 5.2-channel playback
Speakers B: 2.1-channel playback with
bi-amped front speakers
In this example, Speakers A provides 5.2-channel
surround sound for enjoying DVD movies, while
Speakers B is bi-amped for use with a pair of bi-amp
capable speakers. Subwoofer 1 is used with Speakers A
and Speakers B.
FL C FR
FL FR
SL
SW1 SW2
SR
Speakers A
Speakers B
Speaker Impedance
Speakers Type(Front A)
Speakers Type(Front B)
Powered Zone 2
Powered Zone 3
11ch Playback
6ohms
Normal
Bi-Amp
No
No
No
2–1. Speaker Settings
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Front High
Surround Back
Use
Use
Use
Use
Not Use
Not Use
Speakers A
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Front High
Surround Back
Use
Use
Not Use
Not Use
Not Use
Not Use
Speakers B
■ 7.2-channel playback with Speakers A or Speakers B
The following illustration shows how to connect the speakers for up to 7.2-channel playback with Speakers A or Speakers
B. If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.
Note
• The speakers are configured by using the “Speaker Setup” setting (➔ page 66).
• You can choose which speakers you want to use with Speakers A or Speakers B (➔ page 55).
Surround
back left
Surround
left
Surround
right
Front A leftFront A right CenterFront B right Front B left
Surround
back right
Front high
right
Front high
left