Connections
En-19
■ Speakers A
■ Speakers B
Connecting a Power Amplifier
If you want to use a more powerful power amplifier, you
can use the AV receiver as a preamp. Connect all speaker
outputs to the power amplifier. See the manuals supplied
with your amplifier for details.
Note
•Specify “None” for any channel that you don’t want to output
(➔ page 67).
• To perform the 11.2-channel playback, set the “11ch Playback”
setting to “Yes” (➔ page 66).
Woofer (low)
Tweeter (high)
Front A right Front A left
Woofer (low)
Tweeter (high)
Front B right Front B left
L
R
Power amplifier
To Next Page
Loading...
