51
Connections
Connecting an AV Component in a Separate Room (Multi-zone Connection)
Connecting a TV (ZONE 2)
While a disc is played on a Blu-ray Disc player in the main room (where this unit
is located), you can play the video and audio of the same Blu-ray Disc player or
another AV component on the TV equipped with an HDMI IN jack in a separate
room (ZONE 2). Note that only the devices connected to the HDMI IN1 to IN3
jacks can be played on the TV in the separate room.
• Audio from an externally connected AV component can be output only
when the audio is 2 ch PCM audio signal. Also, the audio output of the AV
component may need to be changed to the PCM output.
Setup
• When video and audio via HDMI input are output to ZONE 2, set "1. Input/
Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( →p100) to "Use" on the
Setup menu. Note that when "Zone 2 HDMI" is set to "Use", the resolution
of the video that can be output by the HDMI OUT SUB/ZONE 2 jack will be
limited to "4K Standard" ( →p100).
a HDMI cable
a
TV
Be sure to insert the HDMI
cable all the way in.
To Next Page
Loading...
