Onkyo TX-NR6100 - Page 109

109
SetupSetup
1. Input/Output Assign
 3. Digital Audio Input
Change input assignment between the input selectors and DIGITAL IN
COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---".
 BD/DVD (Default Value: COAXIAL)
GAME (Default Value: ---)
CBL/SAT (Default Value: ---)
STRM BOX (Default Value: ---)
PC (Default Value: ---)
CD (Default Value: ---)
TV (Default Value: OPTICAL)
PHONO (Default Value: ---)
COAXIAL,
OPTICAL
Assign the COAXIAL terminal or OPTICAL terminal to any
input selector.
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.
 4. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks. If
you do not assign a jack, select "---".
 BD/DVD (Default Value: AUDIO 1)
GAME (Default Value: ---)
CBL/SAT (Default Value: AUDIO 2)
STRM BOX (Default Value: AUDIO 3)
PC (Default Value: ---)
CD (Default Value: AUDIO 4)
TV (Default Value: ---)
PHONO (Default Value: PHONO)
• The setting cannot be changed.
AUDIO 1,
AUDIO 2,
AUDIO 3,
AUDIO 4
Assign the AUDIO IN terminal to any input selector.