10
Part Names
Front Panel
1. ON/STANDBY button
2. PURE AUDIO button/indicator: Switches to the
Pure Audio mode. The indicator lights when the
mode is on. ( →p163)
3. HYBRID STANDBY indicator: Lights up when
any of the following functions is working or
enabled in standby state of this unit. When this
indicator is lighting, the power consumption in
standby state increases, however, the increase
in power consumption is minimized by entering
the HYBRID STANDBY mode where only the
essential circuits operate.
– HDMI CEC ( →p120)
– HDMI Standby Through ( →p120)
– USB Power Out at Standby ( →p127)
– Network Standby ( →p127)
– Bluetooth Wakeup ( →p128)
4. Remote control sensor: Receives signals from
the remote controller.
• The reception range of the remote controller
is within a distance of approx. 16´/5 m, and
an angle of 20° in vertical direction and 30° to
right and left.
5. ZONE 2 button: Controls the multi-zone
function. ( →p89)
6. OFF button: Switches the multi-zone function
off. ( →p89)
7. QUICK MENU button: Pressing this button
during playback can make settings such as
"HDMI" and "Audio" quickly on the TV screen
while playing. ( →p73)
8. Display ( →p12)
9. SETUP button: You can display advanced
setting items on the TV and the display to have
a more enjoyable experience with this unit.
( →p103)
10.
Cursor buttons ( / / / ) and ENTER
button: Select an item with the cursors, and
press ENTER to conrm your selection. When
using TUNER, use them to tune in to stations.
( →p65)
11.
RETURN button: Returns the display to the
previous state while setting.
12.
MASTER VOLUME
To Next Page
Loading...
