Onkyo TX-NR6100 - Setup Menu; Menu list

104
Setup
Setup Menu
Menu list
1. Input/Output Assign 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. p106
2. HDMI Input You can change input assignment between the input selectors and HDMI IN jacks.
p108
3. Digital Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
p109
4. Analog Audio Input Change input assignment between the input selectors and AUDIO IN jacks.
p109
2. Speaker 1. Conguration Change the settings of connection environment of the speakers.
p110
2. Crossover Change the settings of crossover frequencies.
p111
3. Distance Set the distance from each speaker to the listening position.
p112
4. Level Calibration Adjust the volume level of each speaker.
p112
5.
Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. p113
6. Equalizer Settings You can adjust the output volume of the range for each connected speaker.
p113
7. THX Audio Change the THX Audio settings.
p114
8. Speaker Virtualizer The Speaker Virtualizer function can be switched between On and Off.
p115
3. Audio Adjust 1. Multiplex/Mono Change the settings of multiplex audio playback.
p116
2. Dolby Change the setting of when Dolby signals are input.
p116
3. DTS Change the setting of when DTS signals are input.
p116
4. LFE Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM,
and DSD signals.
p117
5. Volume Change the Volume settings.
p117