To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR616 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 240 W |
| Dynamic power per channel (4 Ohm) | 210 W |
| Dynamic power per channel (8 Ohm) | 120 W |
| Power output per channel (1KHz@6 Ohm) | 160 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 8 |
| AC (power) in | Yes |
| Composite video in | 5 |
| Digital audio optical in | 2 |
| Component video (YPbPr/YCbCr) in | 1 |
| Connectivity technology | Wired |
| Speakers connectivity type | Banana connector |
| Ethernet LAN | No |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 620 W |
| Package weight | 13500 g |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 11000 g |
Critical numbered safety guidelines for safe operation and maintenance.
Prominent warnings about fire, electric shock, and symbols.
General guidelines and warnings for handling and electrical safety.
Guides on speaker setup, cable connection, and configuration.
Details on HDMI input assignments, ARC, and MHL.
Table showing default assignments for various inputs.
Explains special functions using RI connections (System On, Direct Change, Remote Control).
Instructions for turning the receiver on and off.
Introduction to the initial setup wizard.
Setting the onscreen language and initiating Audyssey auto setup.
Verifying component connections, remote modes, and network.
Finalizing the setup process.
General procedure for playing audio/video sources.
Instructions for playing content from iPod/iPhone and USB devices.
Using the vTuner service and managing favorite stations.
Explains the automatic speaker calibration process.
How to select and interpret various listening modes.
Details on supported formats, speaker configurations, and specific mode types.
Accessing and navigating the setup menus.
Setting up network, DHCP, and auto standby.
Setting remote ID and changing controller settings.
Operating zones, adjusting volume, and muting.
Using the Onkyo Dock and remote for iPod/iPhone.
Finding, entering, and customizing remote control codes.
Solutions for common power, sound, and picture problems.
Addressing issues with network connectivity, USB playback, and remote control functionality.
Step-by-step guide for connecting and configuring RIHD.
Electrical and performance specifications.
