Onkyo TX-NR717 - Connecting Antennas and Power

TX-NR717/818/ DTR-40.4/50.4
OPERATION CHECK-4
2.TEST MODE(1/4)
2-1.TEST MODE FOR MODEL, DESTINATION AND FL DISPLAY
NOTE: If VOL value is not 30 (-52dB) (initial setting), test mode cannot be set.
a. Push ON/STANDBY key while pushing down TV/CD button button to display "TEST-".
b. Then push DIMMER (or RT/PTY/TP) button and get the FL test mode.
c. In the FL test mode, TONE - button is FL TEST UP and TONE + button is FL TEST DOWN.
d. REC OUT and ZONE2 button's originally operation can't work when it is in FL test mode.
e. The contents of the step are as follows.
1. Lit all segment
2. Lit upper 'EDCBA987654321', lower '23456789ABCDEF'.
3. Lit a even number segment
4. Lit an odd number segment
5. The Destination is displayed. Please see the below for detail.
f. To close the FL test, push POWER button.
N R 7 1 7 D 2 0 0 0
MODEL Name
Destination
A B
C
D
TX-NR717: NR717
TX-NR818: NR818
DTR-40.4: DTR404
DTR-50.4: DTR504
A:Value of AD port of BAND
B:Value of AD port of INIT1
C:Value of AD port of INIT2
D:Value of AD port of INIT3
MODEL Name NR717 NR818
Destination DC DF MA JJ DC
MA
JJ
MP
MB
MQ
MP
MR
MQ
MR
ABCD 2000 0000 8000 4000 2400 8400 4400
DTR404 DTR504
DD MA DD MA
MR
2060 8060 2460 8460
Dx: USA
DF: Taiwan
JJ: JAPAN
xx: OTHER
2-2. TEST MODE FOR OPERATION
a. Push STANDBY/ON button while pushing down TV/CD button to display "TEST-_".
b. Next, if the following keys are pushed, it becomes a each TEST MODE.
c. In the test mode, (TONE)- button is TEST MODE DOWN and (TONE)+ button is TEST MODE UP.
d. "TEST 1-00" are used to check a protection circuit, and the relay recovered in one second.
1-00 2-00 3-00 4-00 5-00 6-00
KEY TEST
FIRMWARE
VERSION
BD/DVD CBL/SAT STB/DVR
GAME
GAME1
TUNER TV/CD
MEMORY
(Re-EQ)
TONE
IDLING
TIMER
FL TEST
TUNING MODE
(LATE NIGHT)
DIMMER
(RT/PTY/TP)
TEST MODE
FIRMWARE
COMBINATION CHECK
ENTER
When the MPU version
is displayed, push
"MEMORY(Re-EQ)"
CHECK SUM
TEST MODE
Button --->
Test No. --->