Onkyo TX-NR717 - Precautions

TX-NR717
SERVICE PROCEDURE-2
1.10/12723AM
DISPLAYON/STANDBY
1.10/12723AM
1.07/12710AM7
1.01/12720AM
1.01/12329AEO
(TONE)
(TONE)
(TONE)
(TONE)
(TONE) (TONE)
<e.g.>
<e.g.>
(TONE)
(TONE)
(TONE)
(TONE)
4. To check version of each Firmware
Main Microprocessor
DSP
HDMI/Video Microprocessor
VSP (Video Signal Processor)
Version displayed
only for 3 seconds.
5. Push ON/STANDBY (Power Off).
1. During the POWER ON, please push ON/STANDBY button while pushing down DISPLAY button.
2. The version of main multiprocessor is displayed at FL tube (only 3 seconds).
3. While the version of main microprocessor is displaying, please push (TONE) + button.
4. FL tube displays by rotation as follows.