To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR402 and is the answer not in the manual?
General| Audio Channels | 6.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Composite Video Inputs | 4 |
| Input Impedance | 47 kΩ |
| S-Video Inputs | 2 |
| S-Video Outputs | 1 |
| Audio Inputs | 6 |
| Audio Outputs | 1 |
| Surround Sound Modes | Dolby Digital, DTS, Dolby Pro Logic II |
| Tuner Type | AM/FM |
| Preset Stations | 30 |
| Composite Video Outputs | 1 |
| Digital Audio Inputs | 2 (1 optical, 1 coaxial) |
Details of power output, dynamic power, THD, damping factor, frequency response, and tone control.
Input/output levels and impedance for video signals like component, S-video, and composite.
Description of all input/output terminals and connectors on the rear panel for component connectivity.
Procedure to check DC voltage protection circuits using test modes and voltage application.
Procedure to check current detection circuits using test modes and resistance loading.
Checks for output level accuracy and thermal protection response in the power supply system.
Step-by-step guide for adjusting the idling current of the amplifier section for optimal performance.
