Onkyo TX-SV828THX User Manual

Describes various surround sound modes like Dolby Pro Logic, THX Cinema, Theater, Hall, Live, Arena, and Studio.

Explains the function of the Digital Signal Processor in converting audio signals for sound effects.

Details the requirements and setup for Onkyo's and Xantech's Multi-Room remote systems.

Guidelines for placing speakers in a THX-certified system for optimal surround sound reproduction.

Illustrates general speaker placement for surround sound reproduction using various speaker systems.

Explains the three different modes for center speaker setup (Large/THX, Small, None) and their effects.

Provides guidance on placing a subwoofer for powerful bass sounds and optimal A/V surround experience.

Identifies and explains the functions of all buttons and controls on the front panel of the receiver.

Details the meaning and function of various indicators displayed on the receiver's front panel.

Explains how to connect components for remote control operation using the RI system.

Provides information on connecting the unit to AC power outlets and capacity considerations.

Details how to connect a video-4/camcorder to the receiver, including S-Video connections.

Instructions for connecting front and surround speakers, including notes on banana plugs and impedance.

Shows how to connect the center speaker and subwoofer to the receiver's pre-out terminals.

Instructions for connecting antenna cables, including assembling the AM loop antenna.

Step-by-step guide on how to assemble the AM loop antenna for reception.

Guides on connecting coaxial cables to the 75/300 ohm adaptor for worldwide models.

Explains how to control Onkyo RI components from a sub-room using Xantech system.

Details how to operate non-RI components from a sub-room using emitters and remote sensors.

Describes the indicators and selector switches on the programmable remote control.

Step-by-step guide on how to program the remote control to learn codes from other devices.

Instructions for switching between NTSC and PAL TV systems for the on-screen display.

Details the immediate display and menu screen functions of the on-screen display.

Guides on navigating and operating the receiver's menu system using the remote control.

Explains how to navigate and select input sources using the screen display.

Details how to navigate and select recording sources via the screen display.

Guides on adjusting screen settings like background color and superimpose mode.

Outlines the fundamental steps for operating the on-screen menus using the remote control.

Step-by-step guide to turning on the unit, selecting sources, and adjusting volume.

Explains how to use the Bass, Treble, and Loudness controls for sound customization.

Introduces the system setup menu for configuring speaker levels and parameters for surround modes.

Details how to configure System Setup A for various parameters like speaker modes, filters, and levels.

Explains manual tuning, direct tuning, and FM stereo reception for the radio tuner.

Guides on storing and recalling favorite radio stations using memory and group functions.

Explains what RDS is and the information it provides, like Program Service Name and Program Type.

Lists and describes the PTY (Program Type) classifications available in Europe for RDS broadcasts.

Step-by-step guide to entering station names (up to 8 characters) for preset stations.

Instructions on how to clear previously entered station names from memory.

Explains the process for changing previously entered characters for a station name.

Details how to record audio from one source while listening to another, including tape recording.

Guides on recording and dubbing to tape decks connected to TAPE-1 and TAPE-2.

Explains how to record a source that differs from the currently listened-to source.

General instructions on selecting and operating various surround sound modes.

How to use cursor buttons on the remote to select and adjust surround modes via the screen menu.

How to activate and adjust parameters for the Theater surround mode using the main unit.

Guides on using the remote control and screen menu to set up and adjust the Theater surround mode.

Explains how to simulate different surround speaker image patterns for various modes.

Details how to adjust theater size and hall size parameters for specific surround modes.

Steps to set up and operate the receiver from another room using the multi-room remote control.

How to change the audio source being played in the sub-room from the main unit.

Tips for resolving problems when the remote controller cannot operate components.