En-7
DOCK input source selects the dock (UP-A1, etc.)
connected to the UP-DT1’s Universal Port. Note
that some Universal Port-compatible Onkyo prod-
ucts do not support this functionality, in which
case you will need to set the Mode Selector manu-
ally.
Connecting the DAB Antenna
1. Screw the supplied DAB antenna’s plug
onto the DAB ANTENNA jack.
Once the UP-DT1 is ready for use, you’ll need to
select a DAB station and adjust the position of the
DAB antenna to achieve the best possible recep-
tion.
2. Use thumbtacks or something similar to
fix the DAB antenna into position.
To Next Page
Loading...
