Onyx RX-20 - Machine Operation; Machine Water Flow Adjustment; Information on Brush and Scouring Pad

12
Conventional Scrubbing/Cleaning:
Manually control the water valve to adjust the volume of the cleaning
liquid (water and detergent) owing to the ground.
The brush cleans the oor with the solution, mixing detergent and
water. While the machine advances, pick-up the wastewater on the
oor with the squeegee into the waste water tank.
Machine Water Flow Adjustment
MACHINE OPERATION
Information on Brush and Scouring Pad
To ensure the optimum eciency, please use the correct type of brush for cleaning.
The brush and scouring pad suggested for use are as follows:
It is suggested to
clean the coated oor
without damaging the
oor. Clean without
scratches.
Soft nylon brush
(white)
It is used for scrubbing
slight dirt without
damaging the oor.
It is used for main-
taining a highly
smooth or polished
oor.
It is used for powerful-
ly removing the heavy
coating or base or
super-powerful scrub-
bing.
Crash pad (red)
Gravity folding pad
(black)
Polishing pad (white)