18
MACHINE MAINTENANCE
Only by following daily, weekly and monthly maintenance procedure can the machine be kept in the
optimum working state.
WARNING: Electric shock hazard: Please rst disconnect the battery wiring before
maintaining the machine.
Daily Maintenance (after each use)
1. Drain and clean the wastewater tank.
2. Rinse and ush the oating lter screen in the
wastewater tank.
3. Drain the clean water tank and ush the water tank
with hot water, no higher than 50° C as required.
4. Inspect the pad/brush after cleaning, ensure pad/
brush is still in good condition. If there is any abra-
sion, overturn or replace the brush/pad.
5. Wipe the squeegee blade.
6. Check the abrasion conditions of the scraper edge
of the squeegee blade. If there is any wear and tear,
exchange two sides of the blade.
7. Use multi-purpose detergent and wet cloth to wipe
the machine.
8. Check the abrasion conditions of the skirt side of
the brush head and replace it if there is any wear and
tear or damage.
9. Charge the battery. To prolong the life of the bat-
tery and ensure the optimum eciency of the ma-
chine, the battery must be charged after the use time
of the machine exceeds 30min.
To Next Page
Loading...
