Turn ON your OontZ Angle 3 Pro
Flashing Blue Light
- The OontZ Angle 3 Pro is ready to pair and connect.
Solid Blue Light
- Your device has connected to the OontZ Angle 3 Pro and is ready to play.
- The OontZ Angle 3 Pro allows the last device it was connected with to automatically reconnect
with the speaker each time the speaker is turned on and that device is within range.*
The OontZ Angle 3 Pro can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired device.
- To disconnect the current device, press and hold down the Bluetooth button for 3 seconds.
- The Blue Light will begin flashing and the OontZ Angle 3 Pro is ready for the next device to pair and connect.
Pair & Connect with Your Device -- Step 1
Page 7
- Your device needs to be within 100 unobstructed feet of the OontZ Angle 3 Pro to pair and connect.
If there is an issue when connecting please move your device closer to the speaker, then pair and connect.
- When the charge is too low indicated by a flashing red light on the speaker, your device will not be able to connect with the speaker.
*Exception: certain devices may not automatically reconnect. When connected to an Amazon Echo device it will not automatically
reconnect. You will need to say to your Amazon Echo device, "Alexa, connect my speaker".
To Next Page
Loading...
