Page 15
– Turn on both OontZ Angle 3 Pro speakers.
– Pair and Connect one of the speakers with your device. When connected the Bluetooth Button light will be lit Solid Blue.
This speaker will serve as the Play Control Speaker.
– The second speaker must not be connected to any device, its Bluetooth Button light needs to be flashing. If the second speaker has a
solid Blue Light it is connected to a device and you need to disconnect it by pressing and holding down the Bluetooth Button for 3
seconds until the Bluetooth Button light begins flashing.
- On the Play Control Speaker (speaker with solid Blue Light) press and hold down the Play/Pause button for 3 seconds until the
Play/Pause Button is flashing with a White Light and the speaker says “Dual Pairing”.
- After a few seconds both speakers Play/Pause Button will be lit with a solid White light. The Play Control Speaker will say “Left
Channel” and the second speaker will say “Right Channel”. The speakers will be connected together for Left Channel - Right Channel
and you are ready to play.
Connecting two OontZ Angle 3 Pro speakers together for Left Channel - Right Channel
You can also us the OontZ app to connect two OontZ Angle 3 Pro speakers together - See page 22 for instructions on using the OontZ app
To Next Page
Loading...
