Oontz Angle 3 User Manual

- Plug one end of a 3.5mm audio cable into the AUX IN Jack on the
back of your speaker.
- Plug the other end of the 3.5mm audio cable into the headphone
jack on your laptop/computer or non-Bluetooth audio device.
- Make sure both ends of the cable are fully inserted
- You are now ready to play.
0DNHVXUH\RXU2RQW=$QJOHEDWWHU\KDVDVXɝFLHQWFKDUJH
Page 14
Turn ON your OontZ Angle 3
To Play with Non-Bluetooth Audio Source Devices
Use a 3.5mm Audio Cable
Important: The Bluetooth on the OontZ Angle 3 is disabled when a 3.5mm audio cable is connected to the speaker.
You need to remove the 3.5mm audio cable from the speaker in order to connect to a Bluetooth device.
1RWH:KHQWKHUXEEHUȵDSLVRSHQWRDOORZDPPDXGLRFDEOHWREHFRQQHFWHGWKHVSHDNHULVQRWZDWHUUHVLVWDQW
7KHUXEEHUȵDSQHHGVWREHFORVHGWRNHHSWKHVSHDNHUZDWHUUHVLVWDQW
- Note: The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest
volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

Oontz Angle 3 Specifications

General

Bluetooth Version	4.2
Battery Life	Up to 14 hours
Water Resistance	IPX5
Weight	9 ounces
Bluetooth Range	100 feet
Brand	Cambridge Soundworks
Model	Oontz Angle 3
Speaker Type	Portable Bluetooth Speaker
Charging Port	Micro USB
Audio Input	3.5mm AUX