Cleaning and Maintenance
Clean the Dust Collector and Filters
For optimal performance, follow the instructions below to clean
and maintain Robot regularly. The cleaning/replacement frequency
will depend on your usage habits of Robot.
Recommended cleaning/replacement frequency:
Robot Part
Filters Once every week Every 2 months
Every 6-12 months
Every 3-6 months
(or when visibly worn)
Every 3-6 months
(or when the silicone
rubber strip on the
brush guard becomes
visibly worn)
Once every week
Once every month
Once every month
Once every month
Once every month
Once every month
Rolling Brush
Side Brushes
Brush Guard
Sensors
Charging Pins
Swivel Wheel
Cleaning Frequency Replacement Frequency
1. Press the dust collector release button to pull the dust
collector out
2. Open and empty the dust collector
3. Take out the foam filter and high-performance filter
12
To Next Page
Loading...