4
3
Place the Charging Base on a hard, level surface and
against a wall.
Remove objects within 3 ft/1 m on both sides and
within 6 ft/2 m in front of the charging base.
5 Plug the adapter into the a wall outlet and pulg the DC jack
into the DC socket of the Charging Base.
6ft/2m
3ft/1m
3ft/1m
When the Charging Base connects to AC power, the LED
indicator on the Charging Base is SOLID GREEN
Install the Charging Base in a location that Robot
can easily access. It is recommended to place the
Charging Base against a wall, and on a hard-level
surface rather than on rugs or carpets.
- Always keep the Charging Base plugged in,
otherwise Robot will not automatically return to it.
Charge Your Robot
Robot has a pre-installed rechargeable battery that has to
be fully charged before use.
Robot returns to the Charging Base at the end of a cleaning
cycle or when its battery is running low
Attach Robot to the Charging Base by aligning its charging
pins with the charging pins on the base.
Method 1
T
7
To Next Page
Loading...