Introduction
Thank you for choosing the OPPO HA-2 portable headphone
amplifier and USB DAC. The HA-2 draws upon the success
of the HA-1 desktop headphone amplifier and is optimized for
portable use. Featuring a hybrid class AB amplifier and a
USB DAC supporting 384 kHz PCM and DSD256, the HA-2
offers high performance digital-to-analog conversion for both
Apple’s iPhone/iPod, Android devices, PC and Mac
computers. A 3.5 mm input works with the remaining portable
music players that do not have a USB-compatible digital
output. Convenience features such as VOOC rapid charging
and a mobile device power bank make the HA-2 a true
companion for music on the go.
Accessories
Ensure that the following accessories have been included
with your OPPO HA-2:
1x USB A – Lightning data cable
1x USB micro-B – USB micro-B data cable
1x 3.5 mm – 3.5 mm stereo audio cable
1x USB A – USB micro-B data and rapid charging
cable
1x VOOC rapid charger
2x Silicone rubber bands
This user guide
Features
Digital-to-Analog conversion by ESS Sabre
32
Reference ES9018-2M DAC chip
Supports PCM audio up to 384 kHz / 32-bit, DSD audio
up to 12 MHz (DSD256 or DSD4x)
Supports multiple device types for digital-to-analog
conversion via USB: iPod / iPhone / iPad, smartphones
with USB OTG feature, PC and Mac computers
Stereo headphone output and line-out
Two gain settings for optimal headphone matching
Bass boost
OPPO VOOC rapid charging
Mobile power bank for charging other mobile devices