Listening to Music
To listen to music, you can connect a pair of headphones to
the headphone jack, or connect an amplifier or a pair of
powered speakers to the line-out jack.
Using Headphones
Plug the headphones into the Headphone Jack of the
unit.
Connect the unit to your music source according to the
connections described above. Set the Source Selector
to the correct position.
Turn on the unit by rotating the Power / Volume Knob
clockwise. You will hear a click and the green Power
Indicator will light up.
Start music playback from the source device.
Put on the headphones and adjust the volume.
Turn on Bass Boost if desired.
Using Line-out
To Next Page
Loading...
