OPT MACHINE VISION TECH.CO. LTD
ADD:8 JingSheng Road, JingXia ChangAn DongGuan China 523853
TEL: 0769-82716188 FAX: 0769-81606698
E-mail:optmv1@optmv.com Website:Http://www.optmv.net
4.2 Software function description
Choose the channel(s) (0 means all channels), set the
intensity within the range: 0-255
Choose the channel(s) (0 means all channels), set the
trigger pulse width within the range: 0-999 (unit: ms).
Then click “OK” or “Apply” button.
Set highlight trigger pulse
width
Choose the channel(s) (0 means all channels), set the
trigger pulse width within the range: 0-500 (unit:
0.01ms). Then click “OK” or “Apply” button.
Choose the channel(s) (0 means all channels), set the
trigger pulse width within the range: 0-500 (unit:
0.01ms). Then click “OK” or “Apply” button.
Choose the channel(s) (0 means all channels), set the
trigger pulse width within the range: 0-500 (unit:
0.01ms). Then click “OK” or “Apply” button.
Choose the channel then click “OK” or “Apply” button.
Choose the channel then click “OK” or “Apply” button.
Read highlight trigger
pulse width
Choose the channel then click “OK” or “Apply” button.
Click“detailed information”, one can check the ID of
the controller.
Click“detailed information”, one can check the Click
“detailed information”, you can check the ID of the
controller. of the controller.
Static/ dynamic IP switch
DHCP check box. When it is ticked, the IP is dynamic.
Otherwise, it is static. Default setting is dynamic IP
factory IP address: 192.168.1.16
subnet Mask: 255.255.255
default gateway: 192.168.1.1
The IP need to be static.
To Next Page
Loading...