Opt OPT-DPA1024E-4 - Acronyms

OPT MACHINE VISION TECH.CO. LTD
ADD:8 JingSheng Road, JingXia ChangAn DongGuan China 523853
TEL: 0769-82716188 FAX: 0769-81606698
E-mail:optmv1@optmv.com Website:Http://www.optmv.net
39
OPT ERR RELEASESERIALPORT
FAILED
3001004
failed to release a serial port
OPT ERR SERIALPORT UNOPENED
3001005
attempt to access an unopened serial port
OPT ERR CREATEETHECON FAILED
3001006
failed to create an Ethernet connection
OPT ERR DESTROYETHECON FAILED
3001007
failed to destroy an Ethernet connection
OPT ERR SN NOTFOUND
3001008
SN is not found
OPT ERR TURNONCH FAILED
3001009
failed to turn on the specified channel(s)
OPT ERR TURNOFFCH FAILED
3001010
failed to turn off the specified channel(s)
OPT ERR SET INTENSITY FAILED
3001011
failed to set the intensity for the specified channel(s)
OPT ERR READ INTENSITY FAILED
3001012
failed to read the intensity for the specified channel
OPT ERR SET TRIGGERWIDTH FAILED
3001013
failed to set trigger pulse width
OPT ERR READ TRIGGERWIDTH
FAILED
3001014
failed to read trigger pulse width
OPT ERR SET HBTRIGGERWIDTH
FAILED
3001015
failed to set high brightness trigger pulse width
OPT ERR READ HBTRIGGERWIDTH
FAILED
3001016
failed to read high brightness trigger pulse width
OPT ERR READ SN FAILED
3001017
failed to read serial number of the controller
OPT ERR READ IPCONFIG FAILED
3001018
failed to read IP configuration of the controller
OPT ERR CHINDEX OUTRANGE
3001019
index(es) of channel(s) out of the range
OPT ERR WRITE FAILED
3001020
failed to write data
OPT ERR PARAM OUTRANGE
3001021
parameter(s) out of the range
Note: for acronyms, please refer to Tab. 2
C Acronyms
Table 2: Acronyms
Acronym
Meaning
CH
channel
CON
connection
CONFIG
configuration
CUR
current
ERR
error