OPT MACHINE VISION TECH.CO. LTD
ADD:8 JingSheng Road, JingXia ChangAn DongGuan China 523853
TEL: 0769-82716188 FAX: 0769-81606698
E-mail:optmv1@optmv.com Website:Http://www.optmv.net
1.4. Example programs ································································································ 24
2. Function Specification ······························································································· 27
2.1. Initializing a serial port ·························································································· 27
2.2. Releasing a serial port ···························································································· 27
2.3. Creating an Ethernet connection (by IP) ······································································ 28
2.4. Creating an Ethernet connection (by SN) ····································································· 28
2.5. Destroying an Ethernet connection ············································································ 29
2.6. Turning on channel(s) ···························································································· 29
2.7. Turning on multiple channels ··················································································· 30
2.8. Turning off channel(s) ··························································································· 30
2.9. Turning off multiple channels ··················································································· 31
2.10. Setting intensity ································································································· 31
2.11. Setting multiple intensity ······················································································ 32
2.12. Reading intensity ································································································ 32
2.13. Setting the trigger pulse width ················································································ 33
2.14. Setting multiple trigger pulse width ·········································································· 33
2.15. Reading the trigger pulse width ··············································································· 34
2.16. Setting high brightness trigger pulse width ································································· 34
2.17. Setting multiple high brightness trigger pulse width ······················································· 35
2.18. Reading the high brightness trigger pulse width ··························································· 35
2.19. Enable response ································································································· 36
2.20. Enable checksum ································································································ 36
2.21. Enable back up when power off ··············································································· 36
2.22. Reading serial number ·························································································· 37
2.23. Reading IP configuration ······················································································· 37
3. Appendices ············································································································· 38
A FAQ (frequently asked questions) ·············································································· 38
B Macro Definitions for Error Codes ············································································· 38
C Acronyms ·········································································································· 39
To Next Page
Loading...