Opt PD3000-RGB - Specifications of PD20 SERIES

Type of Laser
Pure diode-based full colors(semiconductor diode laser systems)
Laser Classificaon Class 4
Laser Power
PD20000-RGB
PD25000-RGB
PD26000-RGB
PD30000-RGB
R/5600mW+G/7000mW+B/8000mW
638nm
520nm
445nm
R/9000mW+G/8000mW+B/7500mW
Scanning-system 35kpps ILDA@8° , Scan angle Max 60°
Beam Size@aperture 6.0*6.5 mm
Beam Divergence
Modulaon
Power Supply
Power Consumpon
360*308*215mmDimension
Net Weight
<0.95 mRad
400W 450W 500W 500W
AC 100-240V, 50/60Hz
19.50 kg
>60 KHz
Controls Auto, Sound to light, SD-Card, DMX512 , ILDA
Keyed interlock, emission delay, magnec interlock, scan-fail safety,
mechanical shuer, adjustable aperture masking plate.
Safety elements
Operaon Temperature minus 20℃ to 40℃
Protecon Rang IP54
Due to Advanced Opcal Correcon technology used in our laser
systems the opcal power output of each laser colour within the
system may slightly differ from the specificaon of respecve laser
module(s) installed. This does not affect the total guaranteed power
output.
Important statement
R/7000mW+G/8000mW+B/10000mW
R/8000mW+G/10000mW+B/12000mW
7.0*6.5 mm
8.0*6.5 mm
7.0*6.5 mm
Specificaons of PD20 SERIES
22