OPERATIONS
PD SERIES units come with diode-based only laser sources and all sources have beam correcon ,thus have
great beam show with analog FULL colors modulaon.
The PD SERIES units can be controlled over ILDA and have a bult-in memory with preset
paerns ,also with SD-card slot for freely programs export onto it, that can be easily
triggered through DMX. They can also be operated in automac and sound-to-light mode.
The laser projector provides a master-slave-mode. Show lasers of the same series (slave
projectors), connected via DMX to a main projector (master projector) project the same
paerns like the master projector.
This Series will be applicable for clubs, bars, and those Small/medium venues or theater
events, pares, business acvies, large venues etc.
“PD series projectors are not supplied with standard "E-Stop Box" and "Remote Interlock bypass"
Instead, a simplified “E-Stop Box” featured with “Mushroom switch” and “Key switch” will be supplied in
the purchase accordingly to request.
The “E-stop Box” is generally with a CAT5 cable of 2m length unless there would be different requests.
If user doesn't need adional "E-Stop Switch", Then the “RJ45 jack interlock connector” should be
insterted into the rear plate of the projector’s INTERLOCK posion(with silkscreen INTERLOCK marking) ,only
by this way user will be able to light up the laser projector during operaons.
8
To Next Page
Loading...