2
1. PARTS IDENTIFICATION
(AX-350/650TF only)
(AX-350/650TF Receiver only)
(AX-350/650TF only)
2. PRECAUTIONS
2. Do not install the unit where objects
moved by the wind such as plants and
laundry, which may block the beam.
1. Mount unit only on a solid surface.
3. Prevent direct sunlight
from entering into internal
receiver.
5. Avoid aerial wiring.
4. A different type of beam
should not reach the receiver.
receiver
transmitter
(other model)
transmitter
6. Do not install the unit
on unsteady surfaces.
7. Mount the units more
than 1m away from the
wall or fence.
STANDARD ACCESSORIES
○
Screws (4×20 Self tapping)×8
○
Screws (M4×30)×8
○
U-Shaped brackets
×4
○
Beam Blocking Tool
×2
3.3 ft. (1m)
To Next Page
Loading...
