2
Section 1 – Preface
Thank you for choosing OPTI TEMP for your heat transfer equipment needs. We
encourage your comments about our products and operation manual. Please feel free to
contact us with questions or concerns at 231-946-2931 or information@optitemp.com
.
We appreciate your business!
Section 2 – About this Manual
2.1 General
This manual is intended to serve as a guide for placing your portable chiller in service,
operating it safely, and maintaining it properly. This manual will be supplemented as
required to accommodate any special equipment which may have been provided for a
specific application.
NOTE: The written information contained in this manual, as well as various drawings, are
intended to be general in nature.
OPTI TEMP strives to maintain an accurate record of all equipment produced for the
course of its useful life. While every effort is made to standardize the design features of
these chillers, the various options may make it necessary to re-arrange some of the
components; therefore, some of the general drawings in this manual may differ from your
specific unit.
We encourage all personnel to familiarize themselves with this manual’s contents. Failure
to do so may unnecessarily prolong equipment down time.
2.2 Warnings and Safety Symbols
This symbol marks chapters and sections of this instruction manual which
are particularly relevant to safety
When attached to the unit, this symbol draws attention to the relevant
section of the instruction manual.
This manual assumes the OPERATOR is non-technical with limited
training and the RESPONSIBLE BODY is technical and fully trained.
This symbol indicates that hazardous voltages may be present.
To Next Page
Loading...