To attach glass bossed effect wheels
such as liquid wheels, tighten the cross
headed screw on the shaft of the wheel
rotator as per the image left.
To detach a bossed push on wheel, unscrew the wheel if need be and
make sure the wheel is vertical and straight. Then use both hands to
pull the wheel off the shaft.
To attach plastic bossed push on effect
wheels, simply push the wheels onto
the shaft of the wheel rotator as per the
image left.
Note:
A slight twist when attaching the plastic bossed push on effect wheel
will help.
5
Designed and Manufactured in the UK by Optikinetics
Aura
Note:
The screw needs to be aligned to the at of the shaft.
To Next Page
Loading...
Need help?
General
