3.2 OSE Universal Menu Book support
The barcode readers this demo application supports can be configured by scanning various configuration barcodes
found in our Universal Menu Book*. This makes it possible to customize your barcode reader without having to
actually change the source code of this demo application.
The OPN/PX20 supports (most of the) menu options listed in the following chapters:
1. Defaults (See the supported default label listed above)
3.1 Enabling/disabling readable codes
3.2 Setting of fixed, minimum and maximum lengths of readable codes
3.3 Code specific options (2D symbologies only supported by the PX20)
4.1 Case conversion
4.2 Set prefixes
4.3 Set suffixes
5.1 Read modes, add-on wait modes
5.1.1 Multiple read reset time
5.1.2 Quiet zone options (margins)
5.2 Read time options
5.4 Redundancy
5.5 Positive and negative barcodes
6.1 Buzzer settings
6.2 Good read LED options
7.1 Diagnostics
* The Universal Menu Book can be downloaded from our web site.
To Next Page
Loading...
Need help?
General
