Need help?Do you have a question about the Opticon C 37 and is the answer not in the manual?
General| Light Source | Red LED |
|---|---|
| Reading Width | 80 mm |
| Protection Class | IP42 |
| Type | CCD |
| Interface | USB, RS-232 |
| Resolution | 0.1 mm / 4 mils |
| Supported Barcodes | Code 39, Code 128 |
| Power Supply | 5 VDC ±10% |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20°C to 60°C |
| Operating Humidity | 20% to 85% (non-condensing) |
| Ambient Light Immunity | Fluorescent 3, 000 lx max |
| Drop Test | 1.5 m drop onto concrete surface |
| Vibration Test | 10 - 100 Hz with 2G for 1 hour |
| Min. Resolution at PCS 0.9 | 0.15 mm / 6 mil |
Official registration number related to the device.
Covers defects in materials and workmanship for two years.
Contact details for USA customers.
Contact details for Europe customers.
Lists the barcode symbologies the C37 can scan.
Physical dimensions of the scanner (W x D x H).
Weight of the scanner (excluding cable).
Operating temperature and humidity range.
Storage temperature and humidity range.
Immunity to ambient light conditions.
Describes the scanner's internal components and structure.
Electrical parameters for the RS232 interface.
Electrical parameters for USB and Wedge interfaces.
Input voltage, frequency, and current for AC adapter.
Details about the CCD sensor used in the scanner.
Defines the minimum Print Contrast Signal required for scanning.
Specifies the minimum detectable resolution.
Maximum width of the barcode that can be scanned.
Settings and communication parameters for the RS-232C interface.
Describes the behavior when no handshaking is used.
Explains the ACK/NAK response mechanism.
Settings for USB interface configuration.
Diagram of the USB interface circuit.
Specifications for the standard RS-232C cable.
Specifications for the standard USB cable.
Details about the USB "A" connector.
Pinout and details for the DOS/V Host connector.
Pinout and details for the DOS/V Keyboard connector.
Instructions for setting default interface modes via menu barcodes.
Details for individual scanner packaging.
Details for packaging 50 scanners collectively.
Immunity of the scanner to power line noise.
Resistance to static electricity discharges.
Results of drop tests performed without packaging.
Results of drop tests performed with individual packaging.
Results of cable pulling tests.
Results of cable tail bending tests.
Settings to enable or disable the auto trigger function.
Safety classification for the scanner's light beams.
Electromagnetic compatibility standards met by the device.
Compliance with RoHS directive on hazardous substances.
Warnings regarding dropping or impact.
Guidelines for operating temperature and environmental conditions.
Precautions regarding liquids, dust, and foreign substances.
To Next Page