Need help?Do you have a question about the Opticon OPI 2201 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | Laser |
| Yaw reading angle | -60 - 60 ° |
| Tilt reading angle | 0 - 360 ° |
| Pitch reading angle | -45 - 45 ° |
| Light levels (direct sunlight) | 3000 - 100000 lx |
| Linear (1D) barcodes supported | Code 11, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), MSI |
| 2D (matrix & stacked) barcodes supported | MicroPDF417, PDF417 |
| USB version | 1.1 |
| Cable length | 1.5 m |
| Standard interfaces | USB |
| Connectivity technology | Wired |
| Power source type | AC |
| Product color | White |
| Housing material | - |
| Sustainability certificates | RoHS |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 72 mm |
|---|---|
| Width | 175 mm |
| Height | 95 mm |
| Weight | 185 g |
Scanner dimensions: W 72.0 x D 95.0 x H 175.0 mm.
Scanner weight: 175 g (max.), excluding the interface cable.
Specifies operational temperature and humidity limits for the scanner.
Specifies storage temperature and humidity limits for the scanner.
Details the scanner's performance under various ambient light conditions.
Describes the internal components and system configuration of the OPI 2201.
Defines the absolute maximum voltage and ripple ratings for the scanner.
Specifies the recommended operating voltage and current ranges for the scanner.
Details the operating and standby current consumption of the scanner.
Covers input specifications for the AC adapter.
Details output specifications for the AC adapter.
Describes the imager scanning parameters and components.
Specifies image data formats and transmission times for the scanner.
Defines the minimum Print Contrast Signal required for reliable barcode reading.
Specifies the minimum resolution capabilities for various barcode symbologies.
Details the scanning area and resolution capabilities of the scanner.
Defines the angular tolerances for scanning barcodes.
Specifies guaranteed decoding performance for curved barcodes.
Describes performance for scanning barcodes on moving objects.
Specifies settings, signal levels, and circuits for the RS-232C interface.
Details specifications for USB HID and VCP interfaces.
Specifies settings for the keyboard wedge interface.
Details the standard RS-232C cable type, diameter, length, and weight.
Details the standard USB cable type, diameter, length, and weight.
Details the standard Wedge cable type, length, and weight.
Instructions on how to reset the scanner to default interface settings.
Default settings for enabling/disabling barcode reading.
Default settings for read options, trigger behavior, and buzzer.
Default serial communication settings for RS-232C interface.
Default keyboard settings for Wedge interface.
Default keyboard settings for USB HID/VCP interfaces.
Describes how the scanner is packed individually.
Lists the accessories provided for different scanner models.
Provides an example of collective packaging for the OPI 2201 RS-232C model.
Specifies performance under electrical noise conditions.
Details resistance to static discharge.
Describes drop test procedures and results.
Specifies performance under vibration testing.
Details the scanner's dust and drip protection rating (IP42).
Describes the cable strength test.
Describes the cable bending test.
Describes manual and auto trigger modes.
Details single, multiple, and continuous read modes.
Allows configuration of the reader's ON time after trigger.
Configures the time before the same label can be decoded again.
Covers enabling/disabling auto trigger and sensitivity settings.
Allows configuration of auto trigger sensitivity levels.
Instructions for setting image capture or code reader mode.
Adjusts brightness by setting gamma values for captured images.
Specifies laser and LED safety classifications and precautions.
Covers Electromagnetic Compatibility standards for the scanner.
Information on the Restriction of Hazardous Substances compliance.
Precautions regarding dropping or impacting the scanner.
Guidelines for operating the scanner within specified temperature ranges.
Precautions against immersion in liquids or chemical exposure.
Miscellaneous safety notes, including laser use and power.
To Next Page