Opticon OPI 2201 - USB-HID and USB-VCP Interface Specifications; Wedge Interface Specification

Opticon
OPI 2201
Specifications Manual
29
9.2. USB-HID and USB-VCP Interface Specifications
The USB interface models have two specifications: HID (Human Interface Device Class)
and COM (Communication Device Class).
With the USB-VCP model, a VCP (Virtual Communication Port) allows virtual serial
communication and commands can be transmitted from the host computer.
9.2.1.
Settings
Reading the menu barcodes in section 11.1 can set the USB interface default.
The interface is full-speed USB.
9.2.2.
Interface Specification
Device Class: High-power bus-powered function. This interface does not require
an AC adaptor.
Speed: Full-speed (12 Mbps).
Japanese Kanji data or images cannot be transmitted via this USB-HID interface.
Connect to a Hi-power bus (500 mA max.) USB terminal.
9.2.3.
Circuit
Figure 17: USB interface circuit
9.3. Wedge Interface Specification
Reading the menu barcodes in section 11.1 can set the Wedge interface default.
When connecting a keyboard, use the provided Y cable.
For either interface (USB or HID/Wedge)—Set the language for the scanner and PC
keyboard to the same language before use; otherwise, the output may not be correct.