Opticon
OPI 2201
Specifications Manual
15
7.2. Imager Output
Item Specification Note
Image data format Windows Bitmap, JPEG, TIFF Black spot may appear on the
images, however, it does not affect
the scanning specifications.
Shades of gray 256, 16, 2
Range of output image Select in horizontal and vertical scale.
Resolution of output
image
Full, 1/2, 1/3, 1/4
Interface of output
image
RS-232C, USB-VCP
Transmission time USB-VCP (Full speed) About 4 sec
RS-232C (115.2 kbps) About 120 sec
Shades of gray: 256
Resolution: Full
8. Technical Specifications
The conditions for technical specifications are as follows, unless otherwise specified in each
section.
Conditions
Ambient temperature and humidity: Room temperature (5 to 35º C)
Room humidity (45% to 85% RH)
Ambient light: 1000 to 1500 lx (on the barcode surfact)
Angles Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°
Background: Barcode = black
Space = white
Margin = white
Background of label = black
PCS (in scanning 2D symbologies) 0.9 or higher
Power supply voltage: 6.0 V
Decoding test: Approve the performance when decoding is successful in all
ten tests.
(Decoding is deemed successful when scanning is successful
in 70% of the tests.)
Barcode test sample (1D and 2D) Code 39 (resolution 0.1 and 0.127 mm) and JAN codes used
for the tests are OPTOELECTRONICS test samples printed by
a normal printer. (NW ratio = 1: 1.25)
To Next Page
Loading...
