Opticon OPI 2201 - Default Settings 4: Keyboard Communication Settings-Wedge; Default Settings 5: Keyboard Communication Settings-USB-HID, USB-VCP

Opticon
OPI 2201
Specifications Manual
40
11.5. Default Settings 4: Keyboard Communication Settings—Wedge
Parameter “SU” and “UB” Default Setting
Transmit Enter key output as a suffix Enable
Transmit Tab key output as a suffix Disable
Transmit Arrow right key output as a suffix Disable
Delay after transmission 6 ms
Scan code Scan code set 2 (keyboard)
Select keyboard US keyboard emulation
11.6. Default Settings 5: Keyboard Communication Settings—USB-HID, USB-VCP
Parameter “SU”/”C01” Default Setting
Scanner power: Max power descriptor 500 mA
Keyboard (*1) US keyboard
Vender ID 0x65a (OPTOELECTRONICS)
Transmit Enter key output as a suffix (*1) Enable
Transmit Tab key output as a suffix (*1) Disable
Transmit Arrow right key output as a suffix ( *1 ) Disable
(*1): Settings are valid when using USB-HID interface.