Opticon OPI 2201 - Auto Trigger Settings

Opticon
OPI 2201
Specifications Manual
52
17.2. Auto Trigger Settings
17.2.1. Enable/Disable Settings
Use the following settings to enable or disable the auto trigger. (Auto trigger is
disabled by default).
To enable auto trigger
scan “ZZ”, “+I” and “ZZ” in that order or use the 2D code setting.
To disable auto trigger
scan “ZZ”, “+F” and “ZZ” in that order or use the 2D code setting.
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
Disable auto trigger
_+F_
+F
Enable auto trigger
_+I_
+I
END
_ZZ_
ZZ
2D Code Settings:
Functions Menu labels
Disable auto trigger
Enable auto trigger