Opticon OPI 2201 - Default Settings; Set Default Interface

Opticon
OPI 2201
Specifications Manual
35
b) DOS/V KEYBOARD Side
Figure 26: Front view
Contact Number Signal Name
1 KEY_DATA
2 NC
3 GND
4 VCC
5 KEY_CLK
6 NC
Do not use the keyboard of host during data transmission from the scanner to
host. It may cause problems with the data transmission.
11. Default Settings
11.1. Set Default Interface
Scan the following menu barcodes to return to the default settings.
RS-232C
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
RS-232C
_U2_
U2
END
_ZZ_
ZZ