To Next PageTo Next Page
Need help?Do you have a question about the Opticon OPR 3201 and is the answer not in the manual?
General| Type | Handheld |
|---|---|
| Scanning Technology | Laser |
| Light source | 650 nm visible laser diode |
| Scan rate | 100 scans/sec |
| Ambient light immunity | 100, 000 lux |
| Protection rate | IP42 |
| Interface | USB, RS-232, Keyboard Wedge |
| Supported Barcodes | Code 39, Code 128, Interleaved 2 of 5, Codabar, UPC/EAN |
| Power Supply | 5V DC ±10% |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Operating Humidity | 20% to 85% (non-condensing) |
| Drop Specification | 1.5 m (4.9 ft) to concrete |
| Humidity | Non-condensing |
| Drop test | 1.5 m / 5 ft drop onto concrete surface |
Physical dimensions of the OPR 3201 scanner.
Weight of the OPR 3201 scanner.
Operational temperature and humidity ranges for the scanner.
Temperature range for charging the scanner.
Temperature and humidity conditions for scanner storage.
Scanner performance under various ambient light conditions.
Overview of the OPR 3201 scanner's internal configuration.
Electrical parameters for RS-232C, USB, and Wedge interfaces.
Specifications and details of the AC adapter.
Details on the laser scanning mechanism and performance.
Vertical difference at the ends of the laser scan line.
Maximum deviation from the line between scan ends.
Minimum contrast required for reliable barcode reading.
The smallest detail resolvable by the scanner.
Overview of the scanner's scan area and resolution capabilities.
The range from the scanner edge to the scan origin.
Scanner's tolerance to variations in pitch, skew, and tilt angles.
Scanner performance on curved barcode surfaces.
Specifications for the RS-232C serial communication interface.
RS-232C communication settings like baud rate and data bits.
RS-232C signal voltage levels for transmit and receive.
Diagram of the RS-232C interface circuit.
Data framing format for RS-232C transmission.
Data transmission and reception formats for RS-232C.
Various handshaking options for RS-232C communication.
Specifications for USB HID and USB-VCP interfaces.
Configuration settings for USB interfaces.
Diagram of the USB interface circuit.
Specifications for the keyboard wedge interface.
Configuration settings for the wedge interface.
Details of the standard RS-232C cable and its connector.
Description of the D-sub 9-pin female connector.
Pinout configuration for the RS-232C cable connector.
Details of the standard USB cable and its connector.
Description of the USB Type-A connector.
Details of the standard Y-type keyboard wedge cable.
Description of the wedge cable host connector.
Instructions to reset interface settings to factory defaults.
Default configuration for readable barcode symbologies.
Default settings for read options, trigger mode, and buzzer.
Default communication parameter settings for interfaces.
Default serial communication settings for RS-232C.
Default keyboard communication settings for USB.
Default keyboard communication settings for Wedge.
Details for packaging a single scanner unit.
Details for bulk packaging of multiple scanner units.
Scanner's resistance to static electricity discharge.
Scanner's performance under shock conditions.
Drop test results for the scanner without packaging.
Drop test results for the scanner with packaging.
Vibration resistance of the scanner without packaging.
Vibration resistance of the scanner with packaging.
Scanner's protection against dust and water ingress.
Resistance of the scanner cable to static pulling force.
Cable's endurance to repeated bending stress.
Explanation of the auto trigger functionality for barcode reading.
How the scanner detects when it is placed in a stand.
Configuration options for the auto trigger feature.
Enable auto trigger only when the scanner is in its stand.
Enable auto trigger functionality continuously.
Scanner operates only when manually triggered.
Safety standards and classifications for laser emissions.
General product safety standards compliance.
Electromagnetic compatibility standards and compliance.
Compliance with Restriction of Hazardous Substances directive.
Precautions regarding physical shock and dropping the scanner.
Precautions related to operating and environmental temperatures.
Precautions against immersion in liquids and chemical exposure.
General safety warnings, including voltage drops and environmental factors.
