To Next Page
V
vmartinJul 30, 2025
What to do if the software and menu of Opticon UNIVERSAL MENU BOOK Barcode Reader do not match?
- HHeather HansonJul 30, 2025
If the software and menu of your Opticon Barcode Reader do not match, use the matching menubook.
What to do if the software and menu of Opticon UNIVERSAL MENU BOOK Barcode Reader do not match?
If the software and menu of your Opticon Barcode Reader do not match, use the matching menubook.
What to do if there is garbage on the screen of my Opticon Barcode Reader?
If you see garbage on the screen of your Opticon Barcode Reader, setup the bar code options.
General| Interface | RS232 or USB |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | 1.5 m |
Defines the labels used for configuring the bar code reader via the menu.
Sets default configurations for various interfaces like RS232, USB, and Bluetooth.
Configures serial communication parameters for RS232 interface.
Configures keyboard emulation and USB interface settings.
Configures wireless connections via Bluetooth and IEEE 802.15.4.
Selects which bar code types the reader can decode.
Configures fixed, minimum, and maximum length for bar code data.
Configures specific decoding parameters for individual bar code symbologies.
Converts bar code data to upper, lower, or exchanged case.
Adds prefixes and suffixes to transmitted bar code data.
Maps keyboard keys for direct input into the reader's configuration.
Sets various reading modes like single, multiple, and continuous read.
Manages motor behavior and auto shutoff time for power saving.
Configures buzzer type, tone, duration, and loudness for feedback.
Transmits software version, ROM checksum, and reader settings for diagnostics.
Provides a step-by-step guide to identify and resolve reader operational issues.
Defines key technical terms and acronyms used in the manual.
