Opticon OPR 3201 - Stand Detection; Auto Trigger Settings; Enable when Scanner Inserted in Stand

Opticon
OPR 3201
Specifications Manual
41
16.2. Stand Detection
Enabled: This option automatically enables auto trigger when the reader is inserted into a
stand.
Disabled: The reader auto trigger function behaves the same whether it is in or out of the
stand.
Descriptions in parentheses show menu IDs.
Figure 34: Auto trigger configuration diagram
16.3. Auto Trigger Settings
16.3.1. Enable when Scanner Inserted in Stand
Enable auto trigger only when the scanner is inserted into the stand.
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
Enable auto trigger
_+I_
+I
Enable auto trigger stand detection
_*4_
*4
END
_ZZ_
ZZ
(If the scanner is removed from the stand, auto trigger is disabled and the scanner
should be triggered manually.)