Opticon C 37 - USB Pin Assignment; Wedge Cable

Opticon
C37
Specifications Manual
23
9.2.2. Pin Assignment
Pin Signal
1 VCC
2 -DATA
3 +DATA
4 GND
9.3. Wedge Cable
(Standard specification)
Type: Y cable
Diameter: Φ4.8 ±0.5 mm
Length: 1500 +50, -0 mm
Cores: 6 insulated wires, 1 conductive wire
Weight: Approximately 40 g
(Wedge Y adapter specification)
Type: Straight
Diameter: Φ4.8 mm
Length: 250 ±20 mm, -30 mm
Cores: 6 insulated wires, 1 conductive wire
Weight: Approximately 25 g
Figure 19: Wedge cable