Opticon C 37 - Signal Level; Pin Assignment

Opticon
C37
Specifications Manual
16
8.1.2. Signal Level
Signal Name I/O RS-232C Level (V)
Mark/OFF Space/ON
TxD OUT -5 to -15 +5 to +15
RxD IN -3 to -15 +3 to +15
RTS OUT -5 to -15 +5 to +15
CTS IN -3 to -15 +3 to +15
8.1.3. Pin Assignment
Signal Pin Notes
NC
1
Open (not connected)
TXD
2
RXD
3
---
4
Connected to pin 6 with jumper cable.
GND
5
---
6
Connected to pin 4 with jumper cable.
CTS
7
RTS
8
NC
9
Open (not connected)
FG
SHELL
Shield
Connector: D-sub, 9-pin, Female
Power supply: DC jack, EIAJ voltage Class 2