Opticon C 37 - Trigger and Read Options; Trigger and Read Settings; Enable;Disable Auto Trigger

Opticon
C37
Specifications Manual
33
15. Trigger and Read Options
The product has an optional auto trigger setting, which starts barcode reading automatically by
using sensor detection. The scanner starts barcode reading after detecting reflection from the
surface when the auto trigger is used.
16. Trigger and Read Settings
16.1.1. Enable/Disable Settings
Use the following settings to enable or disable the auto trigger. (Auto trigger is
disabled by default).
To enable auto trigger, scan “ZZ”, “+I” and “ZZ” in that order.
To disable auto trigger, scan “ZZ”, “+F” and “ZZ” in that order.
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
Enable auto trigger
_+I_
+I
Disable auto trigger
_+F_
+F
END
_ZZ_
ZZ
Note: Please configure the following after enabling the auto trigger.