Equipment cart with electric IV pole
Installation and Operating Manual
OPTIKON 2000
4. MAINS INLET AND FUSE HOLDER
The power cord to energize the cart must be connected to this inlet. Use only
the supplied cord or a Medical grade power cord. The socket also hosts two
fuses that interrupt the mains power in case of fault in the cart or in the hosted
consoles.
5.
TAG (MARKINGS)
Provides serial number, electrical rating and other information as required by
EN 60601-1
5.3 TECHNICAL SPECIFICATIONS
PARAMETER SPECIFICATION
Manufacturer:................... OPTIKON 2000 S.p.a.
via del Casale di Settebagni, 13
00138 Rome - Italy
Model:............................ 183001 equipment cart
Regulatory compliance: ...... 93/42/EEC Medical Devices Directive (MDD)
Technical standards: .......... EN 60601-1
ELECTRICAL SPECS
Input voltage:................... 220-230/240 Volt 50 Hz
100/120 Volt 50/60 Hz
Line fuses:....................... 220/240 Volt: 6.3 A T
100/120 Volt: 16 A T
Max output power.............. 1kW
MECHANICAL SPECS
MAXIMUM LOAD:
Equipment tray ................. 25 Kg
Degree of protection against
harmful ingress of water...... IPX0
Level of safety of its use in the presence
of an inflammable anaesthetic mixture
containing air or oxygen or nitrous oxide NOT SUITABLE
Cod. 183001EN 2009-02-17 Rev. C
5-2
To Next Page
Loading...
