Need help?Do you have a question about the Optimum OPTIturn TU 3008V and is the answer not in the manual?
General| Swing over bed | 300 mm |
|---|---|
| Distance between centers | 800 mm |
| Spindle bore | 38 mm |
| Tailstock quill travel | 100 mm |
| Voltage | 230 V |
| Max. turning length | 800 mm |
| Spindle speed range | 50-2000 rpm |
| Motor power | 1.5 kW |
Covers intended use, foreseeable misuses, potential dangers, and operator qualifications.
Focuses on safety during operation, devices, checks, PPE, and electrical safety.
Guides on cleaning, lubrication, initial commissioning, electrical connection, and warm-up procedures.
Details all control buttons, switches, indicators, and their functions for operating the lathe.
Covers starting, stopping, emergency procedures, and speed settings.
Explains turning tapers, thread cutting, tapping, using rests, and general operating procedures.
Covers safety during maintenance, preparation, restarting, and general warnings.
Lists common malfunctions, their causes, and recommended solutions for the lathe.
To Next Page
