Need help?Do you have a question about the Optimum OPTIturn TX 6222 and is the answer not in the manual?
Overview of hazard classification and warning signs.
Categorizes safety warnings (Danger, Warning, Caution, Information).
Displays and explains various specific hazard pictograms.
Defines the lathe's proper application and limitations.
Lists and explains improper uses of the lathe.
Requirements for individuals operating or maintaining the lathe.
Specifies who is permitted to operate the lathe.
Precautions to take during operation.
Lists all safety features integrated into the lathe.
Details on the function and safety of the main switch.
Information on the function and use of the emergency stop.
Procedures for regular safety checks.
Required PPE for safe operation.
General safety rules and unsafe methods to avoid.
Safety precautions before and during maintenance.
Safety checks and maintenance for electrical components.
Safety and procedures for electrical hookup.
Identifies and explains all controls and indicators on the machine.
Conditions for safe commissioning and startup steps.
How to adjust spindle speed, direction, and feed rates.
Guidelines for selecting cutting parameters.
General procedure for thread cutting and thread types.
Safety and operation of the cooling lubricant system.
Example for determining spindle speed based on workpiece diameter.
Reference table for cutting speeds based on material and infeed.
Explanation of the DP700's keypad layout and functions.
General safety rules and steps before starting maintenance.
Table outlining inspection intervals and procedures.
Table detailing inspection methods and intervals for coolant.
List of electrical components with part numbers.
To Next Page
General
